AmScope Canon and Nikon SLR / DSLR Camera Adapter for Microscopes NEW!

You looking to find the "AmScope Canon and Nikon SLR / DSLR Camera Adapter for Microscopes NEW!" Good news! You can purchase AmScope Canon and Nikon SLR / DSLR Camera Adapter for Microscopes NEW! with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $99.98    

Product Feature

• Brand new Canon/Nikon SLR/DSLR Camera adapter for microscopes
• Offers three different mounting sizes on microscope side, 23.2mm, 30mm and 30.5mm, fitting almost all kinds of microscopes including compound and stereo microscopes
• Two microscope adapters included

Product Description

This is a brand new Canon/Nikon SLR/DSLR Camera adapter for microscopes. With two microscope adapters included, it offers three different mounting sizes on microscope side, 23.2mm, 30mm and 30.5mm, fitting almost all kinds of microscopes including compound and stereo microscopes. Its retail value is $500.

AmScope Canon and Nikon SLR / DSLR Camera Adapter for Microscopes NEW! Review

I love this adapter! It gives me the same view as the 10x eyepieces, only rectangular of course, when paired with my Sony NEX 5n and Fotasy EOS-NEX adapter. It is listed as 2x but along with the adapters and APS-C sensor it works out very close to what I see in the 10x evepieces. IMHO the optics are superb at this price point.

Image quality is far better than my eyes can resolve, especially when cropped. I am using this on the Trinoc port of the Amscope T490B.

This is the 'kit' version, meaning it includes adapters for multiple camera mounts. Note: included mounts are for the more modern cameras e.g. Canon EOS (not FD). I have not used the Oly or Nikon's adapters yet but should I decide its nice to know I have them.

Focusing is all manual but once you set the camera in Aperture Priority mode and get the camera focus right, which is the barrel distance into the trinoc port, the camera will shoot whatever the scope is focused on.

I started with an inexpensive Celestron 44421 Imager which quickly became frustrating fuzzy and over magnified - cropped what I was looking at through the eyepieces in half. The reviews I read on USB camera imagers was not looking a whole lot better so I decided to give this adapter a try.

I was blown away by the the quality of the optics. I'm a hobbyist but know what I see. The build quality is also very sturdy - it slides down into my trinoc port aprox. 3/4" - I put a few o-rinks around the barrel to get the focus distance correct. The kit also comes with adapters to fit larger eyepieces and trinoc ports but you will not need them on the Amscope. I may machine one of them down for exact focus every use if my o-rings move or wear. I remove the adapter when covering the scope. The camera is multipurpose!

The trinoc port on the Amscope T490B appears to be vertical which prevents much side loading on the gear. I would be a bit concerned, not with this adapter, but with all the other pieces if mounting through an angled port, such as an eyepiece, with a heavy DSLR camera. I also use a remote shutter release to prevent camera shake.

I would not hesitate to purchase this again, forbid it ever disappear!

Most of the consumer Reviews tell that the "AmScope Canon and Nikon SLR / DSLR Camera Adapter for Microscopes NEW!" are high quality item. You can read each testimony from consumers to find out cons and pros from AmScope Canon and Nikon SLR / DSLR Camera Adapter for Microscopes NEW! ...