ARCA SWISS Monoball p0 with Panning System and 1/4" thread,

You looking to find the "ARCA SWISS Monoball p0 with Panning System and 1/4" thread," Good news! You can purchase ARCA SWISS Monoball p0 with Panning System and 1/4" thread, with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $279.95    

Product Feature

• Camera Mount Thread Size: 1/4"-20 with a 3/8"-16 adapter
• Tripod Mount Thread Size: 3/8" -16
• Head Height: 2.90" / 74mm
• Head Diameter: 2.35" /60mm
• Maximum Load Capacity: 44 lb / 20 kb

Product Description

The p0 is a revolutionary tripod head design due to it precision, ease of use and its extraordinarily strong, concentric and uniform locking force. It's called Knobless because the traditional locking knobs have been removed and replaced by an ingenious geared mechanism. The p0 is precise, stylish, light and very strong - a hand of steel in a velvet glove! At first glance... The first thing you notice is that there are no knobs. You can grasp the tripod head from any angle, left or right and block it simply by turning the knurled part. There's no longer any need to fumble for the locking knob! The tripod head is equipped with three locking elements, arranged around the ball like planets. These locking elements apply a uniform force around the ball ensuringa smooth movement of the camera in any axis. As the camera is placed directly on the ball and not on its neck, the movements are as stable as if they were on a rubber ring. The patented aspherical ball also creates a gravitational friction force thus preventing sudden camera movement. The panning system is unconventionally located just below the camera mount, providing a panoramic rotation that remains in line with the vertical. Not only is the p0 particularly affordable, but it also offers a tilt ball range of 90 � and 360° panning. Despite its super light weight of only 9,9 onces and compact format, it has unbeatable locking power. ARCA-SWISS has gone one step further to offer you tw

ARCA SWISS Monoball p0 with Panning System and 1/4" thread, Review

While you can adjust ball tension via the single large ring, you can't do it with much precision. And since there's no tension limiter you have to find your ideal tension setting every time you make an adjustment instead of being able to dial in a repeatable setting.

The panning tension adjustment isn't as controllable or smooth as with my other ball heads. The ball is small compared to competing ball head designs. That means that it's more difficult to adjust tension for smooth operation with heavier equipment. The main ring's operation isn't very smooth and there's play in the ring assembly.

The Arca quick release clamp for this head lacks a bubble level. The lever action is fussy with two separate interlocks that you need to operate to open the lever part way and to fully open it. And the mounting screw that came with my lever action clamp was too long. It scratched the ball's surface and I had to remove it, grind it down, and reinstall it.

What this head does well: Panning action is right under the camera so you don't need a separate leveling action and can set up fast for panoramic stitch series shooting. The sleeker design makes this head easier carry without snagging and the head is compact. The panning lever doesn't reflect the clean design, however. Its design makes it into a small hook.

I wouldn't recommend this head for heavy camera and lens combinations. It's better suited for a lighter carbon fiber tripod setup where you favor a light, sleek, setup and don't need rock solid, precision control.

Most of the consumer Reviews tell that the "ARCA SWISS Monoball p0 with Panning System and 1/4" thread," are high quality item. You can read each testimony from consumers to find out cons and pros from ARCA SWISS Monoball p0 with Panning System and 1/4" thread, ...